AIR-AP1810W-I-K9

4.8 11

Model:	AIR-AP1810W-I-K9 - Cisco Aironet 1810W Access Point
Detail:	802.11ac Wave 2 Access Point, 2x2:2, 3 GbE, I Regulatory Domain
List Price:	$645.00
Price:	$
Condition:	Brand New Sealed
Availability:	In stock
Shipping:	Express Shipping to world 2-10 Days, via DHL, FedEx, EMS, etc. ? If you finish the payment today, your order will arrive within the estimated delivery time.

US$ 0.00 In stock Brand New Sealed

Ask Our Experts

+86-755-83613914 (Tel)
+86-13824318994 (Mob)
86-755-25524084 (Fax)

Get Quotes up to
2x Faster

Project Inquiry

Overview

AIR-AP1810W-I-K9, providing I Regulaty Domain, is one of the Cisco Aironet 1810W (Wall Plate) Series Access Points. Cisco Aironet 1810W Series Access Points offer a compact, wall plate–mountable access point, ideal f hospitality, cruise ships, residential halls other multi-dwelling-unit deployments. The Aironet 1810W Series combines Gigabit Ethernet wired and 802.11ac Wave 2 wireless connectivity into a sleek device, built to take advantage of existing cabling infrastructure. This combination reduces total cost of ownership with no compromise to the end user.

Quick Specs

Table 1 shows the quick specs of AIR-AP1810W-I-K9.

Product Code	AIR-AP1810W-I-K9
Interfaces	- 1 × 10/100/1000BASE-T PoE uplink pt - 1 × Management console pt (RJ-45) - 3 × 10/100/1000BASE-T pts (local Ethernet pts), including 1 PoE out pt - 1 × passive pass-through pt RJ-45 (back to bottom) - 1 × DC power connect
Features	2x2 single-user/multiuser MIMO with two spatial streams Maximal ratio combining (MRC) 20-, 40- and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) suppt
Regulaty Domain	I (I regulaty domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels
System	- 512 MB DRAM - 256 MB flash - 1.4 GHz system dual-ce CPU
Dimensions (W x L x H)	165 x 114 x 41 mm (Access point without mounting bracket))
Weight	560g (Access point without mounting bracket any other accessies)

Product Details

Figure 1 shows the 360° appearance of the AIR-AP1810W.

Figure 2 shows the face and left side of AP.

Note:

①	The Face of AP	③	48V DC power pt
②	The Left side of AP	④	Kensington lock slot

Figure 3 shows the base of the AP with the pts and connects.

Note:

①	Console pt	④	LAN pt 2
②	Passive Pass-Through pt	⑤	PSE / LAN pt 1
③	LAN pt 3

· PSE / LAN pt 1 provides 802.3af/at Power Sourcing Equipment (PSE) PoE-Out power on the LAN 1 Ethernet interface. With 802.3at input the PoE-Out is 6.95W (Class 2).With DC input the PoE-Out is 12.95W (Class 0).

Table 2. Cisco Aironet 1810W series access points can be mounted directly on the wall, to numerous global wall junction standards, on a desk.

Type of Mounting	Mounting Bracket Kit to be Used
Wall-mount installation on a single gang junction box multiple international standards.	AIR-AP-BRACKET-W2 This bracket is shipped with the access point as standard. A spare can also be dered from Cisco.
Wall-mount installation directly on wall, where standard junction boxes are not available.	AIR-AP1810W-KIT= spacer kit This is kit includes an RJ-45 jumper cable and is separately available from Cisco.
Table-mount installation. See Figure 4.	AIR-OEAP1810-CRD= cradle kit This is kit includes a back cover, RJ-45 jumper cable and is separately available from Cisco.

☆ AIR-AP1810W includes a Wall Mounting bracket ( AIR-AP-BRACKET-W2) and has a number of Accessy options which are sold separately and can be dered as spares.

Figure 4. Table-mount installation.

Note:

①	The AP
②	AIR-OEAP1810-CRD= cradle kit
③	Mounting the AP in the Cradle

· Cisco Aironet AP1810W series access points can be mounted on a table hizontal surface, using the AIR-OEAP1810-CRD= cradle kit. This kit is shipped with the access point as standard and includes a back cover and an RJ-45 jumper cable. It is also separately available from Cisco as a spare.

Compare to Similar Items

Table 3 shows the comparison between two AP.

Models	AIR-OEAP1810-I-K9	AIR-AP1810W-I-K9
Special Feature	OfficeExtend	N/A
Interfaces	- 1 × 10/100/1000BASE-T PoE uplink pt - 1 × Management console pt (RJ-45) - 3 × 10/100/1000BASE-T pts (local Ethernet pts), including 1 PoE out pt - 1 × DC power connect	- 1 × 10/100/1000BASE-T PoE uplink pt - 1 × Management console pt (RJ-45) - 3 × 10/100/1000BASE-T pts (local Ethernet pts), including 1 PoE out pt - 1 × passive pass-through pt RJ-45 (back to bottom) - 1 × DC power connect
Regulaty Domain	I (I regulaty domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels	I (I regulaty domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels

Get Me Infmation

Do you have any question about the AIR-AP1810W-I-K9?

Specification

AIR-AP1810W-I-K9 Specification
Authentication and security	Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2) 802.1X, RADIUS authentication, authorization and accounting (AAA) 802.11i
Software	Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.2.111.0 or later
Maximum clients	Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac	2x2 single-user/multiuser MIMO with two spatial streams Maximal ratio combining (MRC) 20-, 40- and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) support
Ethernet ports	Authentication with 802.1X or MAC filtered Dynamic VLAN or per port Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability)	Integrated Bluetooth 4.1 (including BLE) radio Maximum transmit power: 5 dBm Antenna gain: 2 dBi
Integrated antennas	2.4 GHz, gain 2 dBi 5 GHz, gain 4 dBi
Interfaces	One 10/100/1000BASE-T PoE uplink port Management console port (RJ-45) Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port: ◦ PoE out provides 802.3af when access point is powered by Cisco local power supply (AIR-PWR-C=, AIR-PWR-D=), or ~6.5W when powered by 802.3at, or no output when powered by 802.3af One passive pass-through port RJ-45 (back to bottom) DC power connector
Indicators	Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors Per-port status for local Ethernet ports For privacy, LEDs are automatically turned off when the access point joins a controller. LEDs may be enabled to be administratively - see configuration guide.
Dimensions (W x L x H)	Access point (without mounting bracket): 6.5 x 4.5 x 1.6 in. (165 x 114 x 41 mm)
Weight	Access point without mounting bracket or any other accessories: 1.2 lb (560 g)
Environmental	Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) maximum altitude: 25°C, 15,000 ft (4,500m) Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% percent (noncondensing) Operating maximum altitude: 40°C, 9843 ft (3,000m)
System	512 MB DRAM 256 MB flash 1.4 GHz system dual-core CPU
Input power requirements	44 to 57V DC Optional power supply and power injector: 100 to 240V AC; 49 to 60 Hz
Powering options	802.3af/at Ethernet switch Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=) Optional Cisco local power supply (AIR-PWR-C= or AIR-PWR-D=)
Power draw	Maximum values: 12.95W (15.4W with 100m of cable) with no PoE out, 20.7W (22W with 100m of cable) with 6.49W PoE out and 27.65W with 12.95W PoE out (when powered using AIR-PWR-C or AIR-PWR-D) Note: When deployed using PoE, the power draw numbers listed above include the power loss in 100m of cabling on the uplink port and 100m of cabling on the PoE out port.
Physical security	Torx security screw, included with the access point Kensington security slot
Mounting	Included with the access point: mounting bracket AIR-AP-BRACKET-W2, compatible to install to single gang junction box or multiple international standards Optional: ◦ AIR-AP1810W-KIT=, spacer kit to mount the access point directly on a wall where standard junction boxes are not available ◦ AIR-OEAP1810-CRD=, cradle kit to mount the access point on a desk
Accessories	Mounting bracket: AIR-AP-BRACKET-W2= (available as spare) Spacer kit: AIR-AP1810W-KIT= (sold separately), includes spacer and RJ-45 jumper cable Cradle kit: AIR-OEAP1810-CRD= (sold separately), includes back cover and RJ-45 jumper cable Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports Cisco local power supply: AIR-PWR-D= (sold separately)
Warranty	Limited Lifetime Hardware Warranty

Shipping & Payment

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery Options	Estimated Delivery Time
DHL	2-4 business days
Fedex	2-4 business days
Hong Kong EMS	5-10 business days
Hong Kong Air Parcel	10-20 business days
By Sea	10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

daqintech.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.daqintech.com can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

daqintech.com will quote all destination charge prior once we have confirmed order.
daqintech.com is responsible for transporting goods to door after you have made the payment.

Payment Methods


Paypal	Master Card	Visa


Discover	American Express	JCB


Wire Transfer	eCheck	WestUnion

Warranty

Warranty

100% Low Price Guarantee:

daqintech.com provides high-quality products at low wholesale prices

All items are ORIGINAL and GENUINE only:

Item conditions are all "New Sealed".
All items are fully tested with working conditions by Huawei certified engineer under customers' permission.

100% Money Back Guarantee:

If your returns meet our relevent standards，you can contact our customer service team to exchange or return any product that you bought from us.

Professional Technical Support:

daqintech.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.

Flexible Secure Payment & Shipment:

Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed Huawei product: 1 Year.

The Support Contacts:

If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Standard Services